Unlike most poor manufactured versions of the Dreambox,
our exclusive box has excellent quality hardware
.
No Nonsense!
General Information
This Dreambox 7020 Si digital satellite receiver with full Ethernet communication capabilities. Power PC driven with Linux operating system for endless possibilities, 250 MHz PowerPC Processor(350 Mips).
Legal Stuff
Attention: This receiver can card share in many ways including via IP. It can also record straight to your pc and so much more. It is illegal to view channels you are not subscribed to and DVBMonkey.com will not support such illegal activity. This is sold as an FTA receiver.
Shipping
Postage & Packaging starts at £12.99
Delivery times: We aim to deliver with in 5 working days but it can take up to 7-14 working days depending on the destination. All goods are shipped from China.
Warranty
Remember, DVBMonkey is not interested in shipping poor quality equipment and offers a full 18Month warranty.
Features:
- Linux open source (most parts under the terms of GPL)
- Integrated Compact Flash Interface Slot
- 1 x DVB Common-Interface Slot
- 2 x Smartcard-Reader
- MPEG2 Hardware decoding (fully DVB compliant)
- Supports Linux Standard API (Direct-FB, Linux-FB, LIRC)
- Big-size LC-Display
- USB Port
- 10/100 MBit compatible Ethernet Interface
- Modem
- 12V switch cinch
- V.24/RS232 Interface
- Common NIM DVB-S
- 32 MByte Flash
- Channel-change time < 1 second
- 96 MByte RAM
- Unlimited channel lists for TV/Radio
- Integrated IDE UDMA66 Interface
- Supports directly bouquet-lists
- Support for internal HDD in any capacity
- Full automatic service scan
- Supports EPG (electronic program guide)
- Supports multiple LNB-Switching control (supports DiSEqC)
- RF modulator
- S/PDIF Interface for digital bit stream out (AC-3)
- Supports own videotext
- Audio/Video cinch out
- Fully adaptable OSD in many languages and skin-support
- 2 x Scart-interfaces
- MINI-DIN connector for extern IR (send)
- DreamBox DM7020Si Parts
DBS-Tuner:
Frequency Range 950 . 2150 MHz
Signal Level - 65 dBm . - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1
Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V
Output analogue:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox percolating for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 ∓ MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard>
TV-Scart:
Output: FBAS,RGB,S-Video over OSD selectable
VCR-Scart:
FBAS
Mini DIN:
I2C for steering of external devices
IR function
Ethernet:
10/100 MBit compatible interface
Function Update of Firmware, Connect to PC
USB:
USB 1.2 connector
Serial Interface RS 232:
Type RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Pins:
5V
SDA (I2C-Kanal 2)
SCL
3,3V
GND
IR-Output
GND
LNB power and polarisation :
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
UDMA66 IDE Interface:
Intern for connect HDD
Compact Flash - Reader
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 374 mm x 230 mm x 75 mm
Weight: 1,8 kg without HDD
Power consumption:
< 20W (in operation, horizontal polarization / 400mA LNB current)
< 11W (in operation, without LNB)
< 4W (Deep-Standby-Mode)
Input voltage:
230V / 50 Hz alternating acurrent +/- 15%
All pictures used are for illustration purpose only and may not resemble the product identically.
